Terminal machine functions
14
Operating TIM 1.0 (Tractor Implement Management) 14.10
Comprima F 155 XC
Original Operating Instructions 150001050_01_en
129
ð
The prompt
appears after approx. 2 seconds to swivel the blades out via the
tractor hydraulics:
Confirm the prompt on the display.
To swivel out the blades, actuate the control unit (green, 7-).
ð
The prompt
appears after approx. 2 seconds to lower the blade cassette via
the tractor hydraulics.
Confirm the prompt on the display.
In order to lower the blade cassette, actuate the control unit (green, 7-).
ð
The prompt
appears after approx. 2 seconds to lift the blades slightly via the
tractor hydraulics.
Confirm the prompt on the display.
To raise the blades slightly, actuate the control unit (green, 7+).
Æ
The status "maintenance position" is indicated on the status line of the working screen.
14.10
Operating TIM 1.0 (Tractor Implement Management)
For version with "TIM 1.0"
14.10.1
Mode of operation of TIM 1.0
WARNING
Risk of injury due to unpredictable movement of the round bales when the machine is
operating on a slope
If round bales are deposited on a slope, they may start moving on their own. Once round
bales have started moving, their weight and cylindrical shape may cause serious accidents
and injure people.
On slopes, deposit round bales in manual mode only.
On slopes, always deposit round bales in such a way that they cannot start moving on
their own.
TIM 1.0 (Tractor Implement Management) uses data exchange between the ISOBUS job
computers on machine and tractor so that the machine can control the tractor and therefore
take pressure off the driver.
When the tying cycle starts, the tractor is automatically stopped by TIM. When the tying cycle is
complete, the tailgate is automatically opened by TIM, the round bale is ejected and the tailgate
is closed. To bale the next round bale, the driver only has to approach the tractor. Then the
tractor driver must independently drive at a speed adjusted to visibility, weather or ground
conditions.