manualshive.com logo in svg

Krone Comprima F 155 XC, Original Operating Instructions, Page: 153 / 278

Share
Download
Krone Comprima F 155 XC Original Operating Instructions Download Page 153

Terminal menus

15

Menu 14 "ISOBUS" 15.19

Comprima F 155 XC

Original Operating Instructions 150001050_01_en

153

Connecting machine and tractor to each other

1

TIM

Brand: AGCO-FENDT

Model: 530.970.070.010

Function Instance: 0

TIM

TIM

TIM

TIM

14-5

EQG003-095

When the TIM functions have been preselected, the checkboxes disappear and the TIM

status 

 is indicated on the display. The machine is being registered and authenticated

with the tractor.

The TIM status switches to 

.

„

To activate TIM on the machine, press the key 

TIM

.

Æ

The TIM status switches to 

. The machine waits for confirmation of the tractor.

„

Confirm the TIM activation on the terminal or on another control panel on the tractor.

Æ

The TIM status switches to 

. The machine automatically takes over control of the

TIM functions on the tractor, 

refer to page 129

.

15.19.2

Menu 14-9 "Switching between terminals"

INFORMATION

This menu is only available if several ISOBUS terminals are connected.

When the user switches terminals for the first time, the configuration of the machine is loaded
into the next terminal. The loading process can take a few minutes. The configuration is stored
in the memory of the next terminal.

Up to the next call, the machine is no longer available in the previous terminal.

When restarting, the system makes attempts to start the last used terminal. If the last used
terminal is no longer available (e.g. because it was dismounted), the restart is delayed as the
system searches for a new terminal and loads the specific menus into the terminal. The loading
process can take a few minutes.

Summary of Contents for Comprima F 155 XC























































































































































































































































































Reviews:

No comments