manualshive.com logo in svg

Krone Comprima F 155 XC, Original Operating Instructions, Page: 63 / 278

Share
Download
Krone Comprima F 155 XC Original Operating Instructions Download Page 63

Commissioning

7

Connecting the KRONE ISOBUS terminal (CCI 800, CCI 1200)

7.11

Comprima F 155 XC

Original Operating Instructions 150001050_01_en

63

Tractors with integrated ISOBUS system

EQ003-120

ü

The machine is shut down and safeguarded, 

refer to page 27

.

Connection terminal to tractor

„

Connect the 9-pin plug (1) of the terminal to the 9-pin socket (2) (In-cab).

Connection tractor to machine

INFORMATION

The cable (5) can be ordered by quoting the order number 20 085 866 *.

„

Connect the 9-pin plug (4) of the cable (5) to the 9-pin ISOBUS socket (3) of the tractor.

„

Connect the 11-pin plug (6) of the cable (5) to the 11-pin socket (7) of the machine.

7.11

Connecting the KRONE ISOBUS terminal (CCI 800, CCI 1200)

NOTICE

Short circuit caused by impurities and moisture in the plug connection

The machine may be damaged by a short circuit.

„

Make sure that the plugs and sockets are clean and dry.

INFORMATION

To mount the terminal in the tractor cabin, observe the provided operating instructions of
terminal.

Summary of Contents for Comprima F 155 XC























































































































































































































































































Reviews:

No comments