Krone Comprima F 155 XC, Original Operating Instructions, Page: 256 / 278

19 Malfunction, cause and remedy
19.6 Setting the tailgate lock
256
Comprima F 155 XC
Original Operating Instructions 150001050_01_en
Make the following setting on the right and left sides of the machine in the same way:
ü The safety guard (3) is dismounted.
„
Check dimension X of the spring (2).
ð
If the dimension is X=340 mm , the setting is correct.
ð If the dimension X is not X=340 mm , the tailgate lock must be set.
„
To set the tailgate lock, release or tighten the nut (1) until the dimension is X=340 mm .
Setting the baling pressure indicators on the tailgate lock
For “medium electronics” version
If the baling pressure indicators do not move back fully to the initial position when the tailgate is
closed, the baling pressure indicators must be set.
2 1
5 4
3
RP000-532
It can be read off on the baling pressure indicators (4) on the right-hand side of the machine
whether the tailgate is fully closed. The tailgate is completely closed when the baling pressure
indicators (4) are lifted slightly off the stop (5) and the wire rope (3) is tensioned.
If the baling pressure indicators (4) are lifted considerably off the stop (5), the tailgate no longer
closes fully.
Make the following setting on the right and left sides of the machine in the same way:
„
Check that the tailgate lock is set correctly, refer to page 255 .
„ To set the baling pressure indicators, release the screw connection (2) on the rope pulley (1)
and push in the oblong hole so that the wire rope (3) is tensioned.