manualshive.com logo in svg

Krone Comprima F 155 XC, Original Operating Instructions, Page: 132 / 278

Share
Download
Krone Comprima F 155 XC Original Operating Instructions Download Page 132

14

Terminal machine functions

14.11 Operating machine via joystick

132

Comprima F 155 XC

Original Operating Instructions 150001050_01_en

ü

The TIM status on the working screen is on 

.

„

Press 

TIM

.

Æ

The TIM functions are paused and must be operated manually via the tractor control units.

The TIM status switches to 

.

„

To reactivate the TIM functions, 

refer to page 131

.

It is also possible to deactivate only the individual TIM function "Opening and closing tailgate at
the end of the tying cycle", e.g. if the machine is in an unfavourable position for ejecting the
round bale.

„

To deactivate the TIM function "Opening and closing tailgate at the end of the tying cycle",

select the checked checkbox 

 next to the icon 

.

Æ

The checkbox is empty 

 and the TIM function has been deactivated.

14.11

Operating machine via joystick

14.11.1

Auxiliary functions (AUX)

There are terminals which support the additional function “Auxiliary” (AUX). By means of this
function, programmable keys of peripheral equipment (e.g. joystick) can be assigned with
functions of the connected job computers. A programmable key can be assigned with several
different functions. If key assignments are saved, the display shows corresponding menus when
switching on the terminal.

The following functions are available in the “Auxiliary” (AUX) menu:

Icon

Explanation

Start tying

Select type of operation for tying: Automatic or manual mode

%

Increasing baling pressure

%

Reducing baling pressure

14.11.2

Auxiliary assignment of a joystick

INFORMATION

The examples below represent a recommendation. The assignment of the joystick can be
adapted to own desires.

For further information, please refer to the operating instructions of the used terminal.

Summary of Contents for Comprima F 155 XC























































































































































































































































































Reviews:

No comments