manualshive.com logo in svg

Krone Comprima F 155 XC, Original Operating Instructions, Page: 121 / 278

Share
Download
Krone Comprima F 155 XC Original Operating Instructions Download Page 121

Terminal machine functions

14

Displays on the working screen

14.3

Comprima F 155 XC

Original Operating Instructions 150001050_01_en

121

14.3

Displays on the working screen

100

50

0

60

%

40/

EQG003-009

The available icons comply with the equipment of the machine. The following represented icons
are not always available.

Icon

Explanation

The TIM status indicates the successful connection between tractor and
machine. The machine automatically takes over control of the TIM func-
tions on the tractor, 

refer to page 129

.

Flashing:

 2 TIM functions are currently active, one TIM function of which

has been overridden. The connection is restored by pressing the

key 

TIM

 and then confirming on the tractor.

Direction display.

Summary of Contents for Comprima F 155 XC























































































































































































































































































Reviews:

No comments