Krone Comprima F 155 XC Original Operating Instructions Download Page 55 | Manualshive

Page: 55 / 278

Krone Comprima F 155 XC Original Operating Instructions Download Page 55

Commissioning

7

Connecting hydraulic hoses

7.3

Comprima F 155 XC

Original Operating Instructions 150001050_01_en

55

1

RPG000-096

Push the universal shaft (1) onto the tractor PTO shaft.

RP000-234

On the machine side hook the safety chain (2) into the eye (3) on the protective cap (1).

7.3

Connecting hydraulic hoses

WARNING

Risk of injury from escaping hydraulic oil

The hydraulic system operates at very high pressure. Escaping hydraulic oil may seriously
injure skin, limbs and eyes.

Before connecting the hydraulic hoses to the machine, depressurise the hydraulic system
on both sides.

Before uncoupling the hoses and performing work on the hydraulic system, depressurise
the hydraulic system.

When connecting the quick couplings, ensure that they are clean and dry.

Check hydraulic hoses at regular intervals

refer to page 198

and replace them if they are

damaged (e.g chafing areas or points of contact) or aged. The replacement lines must
comply with the technical requirements of the device manufacturer.

NOTICE

Damage to the machine due to soiling of the hydraulic system

If foreign objects or liquids get into the hydraulic system, the hydraulic system may be
severely damaged.

When connecting the quick couplings, ensure that they are clean and dry.

Check the hydraulic hoses for abrasion and pinch point and replace if required.

«
...
53
54
55
56
57
...
»

Summary of Contents for Comprima F 155 XC























































































































































































































































































Reviews:

No comments