Krone Comprima F 155 XC, Original Operating Instructions, Page: 203 / 278

Maintenance 18
Setting the scraper and stone deflector 18.14
Comprima F 155 XC
Original Operating Instructions 150001050_01_en 203
Setting the scraper rail
For version with "Net wrapping" or "Net and chamber film wrapping"
5
6
3
1 2
3
4
7
RP000-531
„
Mount the scraper bar (1) in the centre of the oblong hole in the lateral housing part and
slightly tighten the screw connection (6) on both outer sides of the bale chamber.
„ Position the scraper rail (3) up to the spiral roller (4).
„
Tighten all screw connections (2) and the threaded pins (7).
„ Hammer in the clamping wedge (5) on both outer sides of the bale chamber and tighten the
screw connection (6).
„
Turn machine manually and check whether the scraper rail (3) is positioned the spiral
roller (4).
If the scraper rail (3) is not positioned on the spiral roller (4):
„
Loosen the screw connection (6) on the clamping wedge (5).
„ Turn the clamping wedge (5) by 180° and tighten the screw connection (6).
INFORMATION
It is possible to turn the clamping wedge by 180° as its dimensions from oblong hole to the
upper and lower stop edge are different.
Setting and tightening the scraper reinforcer
For the "Net and chamber film wrapping" version
1
3
1
3
4
2
RP000-302
„
Place the scraper reinforcer (3) on the spiral roller (4).
„
Tighten the screw connections (2), tightening torque, refer to page 192 .