manualshive.com logo in svg

Krone Comprima F 155 XC, Original Operating Instructions, Page: 60 / 278

Share
Download
Krone Comprima F 155 XC Original Operating Instructions Download Page 60

7

Commissioning

7.9

Connecting KRONE terminal DS 500

60

Comprima F 155 XC

Original Operating Instructions 150001050_01_en

Tractors with integrated ISOBUS system

1

4

7

3
6
9

1

8

2

3

5

4

6

7

EQ003-251

ü

The machine is shut down and safeguarded, 

refer to page 27

.

ü

The machine is shut down and safeguarded, refer to chapter Safety “Shutting down and
safeguarding the machine” in the operating instructions of the machine.

Connection terminal to tractor

„

Connect the 9-pin plug (2) of the cable (1) to the 9-pin socket (3) (In-cab).

Connection tractor to machine

INFORMATION

The cable (6) can be ordered by quoting the order number 20 086 886 *.

„

Connect the 9-pin plug (5) of the cable (6) to the 9-pin ISOBUS socket (4) of the tractor.

„

Connect the 11-pin plug (7) of the cable (6) to the 11-pin socket (8) of the machine.

Summary of Contents for Comprima F 155 XC























































































































































































































































































Reviews:

No comments