Krone Comprima F 155 XC, Original Operating Instructions, Page: 36 / 278

2 Safety
2.7 Safety equipment
36
Comprima F 155 XC
Original Operating Instructions 150001050_01_en
Pos. Designation Explanation
3.1 Overload protection universal
shaft • The overload protection guards the tractor and
the machine from load peaks, refer to
page 38 .
3.2 Pick-up overload protection • The overload protection guards the tractor and
the machine from load peaks, refer to
page 38 .
4 Wheel chocks • The wheel chocks secure the machine against
rolling away. 2 wheel chocks are affixed to the
machine,
refer to page 77 .
• For version with "Parking brake": In order to
prevent the machine from rolling away, use the
parking brake in addition to the wheel chocks,
refer to page 76 .
5 Support jack • The support jack is used to keep the machine
stable when it is not connected to the tractor,
refer to page 73 .
6 (de-
pending
on
country
version) SMV emblem • The Slow-Moving Vehicle emblem may be
attached to slow-moving machines or vehicles,
refer to page 36 . The country-specific
specifications must be observed.
• The SMV emblem is at the rear in the centre or
on the left.
• If the machine is transported on transport
vehicles (e.g. lorry or train), the SMV emblem
must be covered or removed.
7 Stop cock tailgate • The tailgate stop cock is a safety component
which prevents the tailgate from unintentionally
closing,
refer to page 75 .
2.7.1 SMV emblem
For the version with “SMV emblem”
KM000-567
The SMV emblem (Slow-Moving Vehicle) (1) can be mounted on slow-moving machines or
vehicles. The country-specific specifications must be observed.
The SMV emblem (1) is at the rear in the centre or on left.
If the machine is transported on transport vehicles (for example lorry or train), the SMV emblem
must be covered or dismounted.