Krone Comprima F 155 XC, Original Operating Instructions, Page: 79 / 278

Operation 8
Operating the bale counter 8.11
Comprima F 155 XC
Original Operating Instructions 150001050_01_en 79
Position Brake force
(I) Full load (1/1)
(II) Half load (1/2)
(III) switched off (0)
„ Turn the brake force regulator (1) in the direction of the arrow to the required position.
8.11 Operating the bale counter
For “medium electronics” version
1
2
RPG000-178
The bale counter (1) is actuated every time the tailgate is opened. The bale counter (1)
is located on the left side of the machine behind the side hood.
Resetting bale counter to 0
„
Press the knurled head screw (2) and hold it down until the bale counter (1) displays 0000.
8.12 Pick-up
8.12.1 Bringing the pick-up to transport/working position
Working position
WARNING! Risk of injury due to falling pick-up! While the pick-up is being lowered,
remove people from the movement range of the pick-up.
„ To preselect the pick-up, press the key on the terminal, refer to page 119 .
ð
The key switches to .
„
To lower the pick-up into the working position, actuate the control unit on the tractor (yellow,
3+).
Transport position
„
To preselect the pick-up, press the key on the terminal, refer to page 119 .