Krone Comprima F 155 XC, Original Operating Instructions, Page: 143 / 278

Terminal menus 15
Menu 5 “Bale diameter” 15.13
Comprima F 155 XC
Original Operating Instructions 150001050_01_en 143
Special feature of chamber film wrapping
The tying start delay is automatically set to 0.0 s for chamber film wrapping. KRONE
recommends this setting.
At high driving speeds, the tying start delay can be set to a minimum for chamber film wrapping:
„
Increase or decrease the value, refer to page 137 .
„
To save the value, press .
15.13 Menu 5 “Bale diameter”
The diameter of the round bale can be set between 125 and 150 cm.
n
150
125
135
cm
5
EQG003-019
ü
For The menu level is active, refer to page 136 .
„
To open the menu, press .
Æ
The display shows menu “Bale diameter”.
Adjusting bale diameter
„ Increase or decrease the value, refer to page 137 .
„
To save the value, press .
15.14 Menu 7 “Sensitivity of direction display”
This menu is used to set the sensitivity of the direction display.
The direction display indicates whether the swath is picked up in the centre by the pick-up and
provides information about the required direction of travel. The higher the bar on the display, the
more sensitive the direction display is set. The higher the sensitivity of the direction display is
set, the stronger the motion indication appears in the form of arrows on the working screen.
How the bale chamber is optimally filled by the pick-up, refer to page 69 .