Krone Comprima F 155 XC, Original Operating Instructions, Page: 49 / 278

Initial operation 6
Universal shaft 6.6
Comprima F 155 XC
Original Operating Instructions 150001050_01_en 49
6.6 Universal shaft
6.6.1 Adjusting the length of the universal shaft
NOTICE
Changing the tractor
The machine could be damaged if the universal shaft length is not checked when changing
the tractor.
„
In order to avoid damage to the machine, check universal shaft length every time the
tractor is changed and correct it, if necessary,
refer to page 49 .
1
RPG000-086
The universal shaft (1) must be shortened as far as allowed by the narrowest position of both
universal shaft halves.
To move the machine into the shortest position:
„
Turn the steering of the tractor all the way to the left or to the right and move tractor and
machine forwards until the narrowest position is reached when driving around curves.
„ Switch off the engine and remove the ignition key and carry it with you.
„
Secure machine and tractor against rolling away.
„
Instructions on how to shorten the universal shaft (1) can be found in the operating
instructions of the universal shaft manufacturer.