Krone Comprima F 155 XC, Original Operating Instructions, Page: 212 / 278

18 Maintenance
18.21 Adjust drive chains
212
Comprima F 155 XC
Original Operating Instructions 150001050_01_en
If the spring tension cannot be set to the dimension X
1
in this way:
„ Remove the support (3).
„
Turn and mount the support (3) vertically by 180°.
„ Mount the spring (4) on the borehole (2).
„
Use the nut on the eyelet bolt (5) to set the dimension X
1
=220 mm .
Setting the stop
„
To set the stop, use the nut (8) to set the dimension X
1
=105-110 mm .
„
Ensure that the support (6) and stop rubber (7) do not touch each other and that there is a
slight gap.
INFORMATION
The drive chain is supplied with oil via the central chain lubrication system, refer to page 97 .
18.21.4 Drive chain of the auger conveyor
1
2
X
3
4
RP000-473
The drive chain (2) of the left auger conveyor is on the left side of the machine behind the pick-
up guard (1).
The dimension X of the tensioned spring length (3) must be X=60 mm .
ü
The machine is shut down and safeguarded, refer to page 27 .
ü The pick-up guard (1) has been removed.
ü
The drive chain (2) and the pick-up guard have been cleaned.
„
To tension the drive chain (2), use the nut (4) to set the dimension X=60 mm .
INFORMATION
The drive chain is supplied with oil via the central chain lubrication system, refer to page 97 .