Settings
277
Pos: 93.83.7 /BA/Ei nstellungen/Groß packenpresse/Presskolbeneinstellung/Einstellung der Pr eß kolbenmesser BiG Pack 1290 HD P II / 870 @ 271\mod_1403009739054_78.docx @ 2046668 @ @ 1
• Release the flywheel brake and turn the flywheel manually in the direction of operation until
the blades are above the counterblade.
• To secure the baling ram, tighten the flywheel brake.
• Measure the dimension "a" between the blade and counterblade.
If the dimension "a" = 2 to 4 mm, the blades are correctly set.
If the dimension "a" is not 2 to 4 mm, spacer washers must be inserted or removed.
• Release the flywheel brake and turn the flywheel manually in the direction of operation until
the blades are freely accessible.
• To secure the baling ram, tighten the flywheel brake.
• Unscrew the front plates.
• Loosen the bolts on the blade and add or remove spacer washers until the
dimension "a" = 2 to 4 mm.
• Tighten the bolts and screw on the front plates.
• Release the flywheel brake and turn the flywheel manually in the direction of operation until
the blades are above the counterblade.
• To secure the baling ram, tighten the flywheel brake.
• Measure the dimension "a" between the blade and counterblade.
If the dimension "a" = 2 to 4 mm, the blades are correctly set.
If the dimension "a" is not 2 to 4 mm, repeat the process until the dimension "a" = 2 to 4
mm.
Pos: 93.83.8 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1