Ch.2 Unpacking and Installation
< 78 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
2.5 Installing Accessories
The procedure for installing accessories included in the DRYPRO 793 consignment is described below.
1
Take out the exhaust duct from the accessories
packing box.
2
Remove the 2 screws (Truss screws M4X8)
provided for installation of the exhaust duct on
the rear side of the main body.
3
Secure the exhaust duct to the back of the main
body using the 2 screws (Truss screws M4X8)
removed in step-
2
.
1
take out the 2 film stoppers from the accessories
packing box.
3
Secure the film stoppers to the back of the main
body using the 2 screws (TP screws M4X8)
removed in step-
2
.
-This will secure the film stoppers in place.
In cases where the film
stoppers are not
installed, failure to
block the film holder
screw holes will not
produce film fogging.
2.5.1 Installing Exhaust Duct
The procedure for installation of the exhaust duct is described below.
Installation of the exhaust duct produces a downward directed exhaust flow and also reduces fan-
generated noise.
2.5.2
Installing Film Stoppers (Spacers) (Option)
The procedure for installation of the film holder options is described below.
Installation of the film stoppers prevents blockage of the intake in the back of the main body.
2
Remove the 2 screws (TP screws M4X8)
provided for installation of the film stoppers on
the rear side of the main body.
