Ch.2 Unpacking and Installation
< 49 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
18
Align the embosses to the receptacle holes (one
on the main body, two on the pickup unit),
secure the hardware for fixing the left side of
main unit
Enbosses
Screw hole for
securing togeher
with front cover.
The one remaining screw hole is used when installing the front cover.
17
Remove one screw (TP screw M4x8) from the
position illustrates in the left.
19
Install the pickup unit and the component for
securing the right side of the main body in the
position shown at left (pickup unit side) using
one screw (TP screw M4X8).
Embosses
Screw hole for
securing together
with front cover.
The one remaining screw hole is used when installing the front cover.
16
Holding the pickup unit by both sides, as
illustrated in the photograph, set the unit on the
two rails in the main body and set in place.