Ch.6 Web Maintenance Mode
< 172 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
6.3 Web Maintenance Mode Menus
Web maintenance mode menus are described below.
6.3.1 Film Setup
<Film Setting>
The procedure for making film size and type settings for film output by DRYPRO 793 is described
below.
p.170 FILM SETUP
Item
Default
Descriptions
FILM SIZE
Tray-1 : 14x17
Sets film sizes for film loaded in each of the trays.
Tray-2 : 14x17
"14x17"
: 14inch x17inch film
Tray-3 : 8x10
"14x14"
: 14inch x14inch film
"11x14"
: 11inch x14inch film
"10x12"
: 10inch x12inch film
"8x10"
: 8inch x10inch film
FILM TYPE
Tray-1 : B
Sets the film type for film loaded in each tray.
Tray-2 : B
"B"
: Blue base film
Tray-3 : M
"C"
: Clear base film
"M"
: Mammography film
COUNT
Tray-1 : 0
Sets the film count for film loaded in each tray.
Tray-2 : 0
Settings may be made within a range of 0 – 126.
Tray-3 : 0
Since the product is shipped with no film loaded, the setting in the
shipping configuration is "0".
In the event that film has been loaded prior to this point, the loaded
film count will be displayed.
SHEETS OF PACKAGE
Tray-1 : 126
Sets the film package count for each tray.
Tray-2 : 126
The value printed on the film box +1 should be set.
Tray-3 : 126
(This is to allow for the calibration sheet used when film is loaded.)
Settings may be made within a range of 0 – 126.
TRAY USE
Tray-1 : ON
Sets the usage status of each tray.
Tray-2 : OFF
"ON"
: Tray used.
Tray-3 : OFF
"OFF"
: Tray not used.
