Ch.2 Unpacking and Installation
< 67 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
2.4.11 Installing Lis-793 (Option)
The procedure for installation of Lis-793 is described below.
2
Remove the 2 screws (Truss screws M4X8) and
remove the upper left cover.
- To remove the upper left cover, slide it toward the
rear of the main body and lift.
- The removed upper left cover is no longer needed.
3
Remove the top cover.
- The top cover may be removed without removing
screws after removal of the rear and upper left
covers.
4
Loosen the 2 screws (TP screws M4X12) and
loosen the operation unit.
- The operation unit screws are loosened to enable
removal of the exit cover.
5
Remove the 2 screws (TP screws M4X8) and
remove the exit cover.
- The removed exit cover is no longer needed.
1
Remove the 5 screws (Truss screws M4X8) and
remove the rear cover.
Be careful that the operation panel does not drop when the screws are loosened.
Removed covers
should be kept for use
in the event that
unnecessary options
are removed in the
future. Disposal of any
unnecessary covers
should be carried out in
accordance with local
ordinances and
regulations.
