1
Disengage the upper front cover disengaging
lever and open the upper front cover.
Lift the lever to
disengage the lock.
Ch.2 Unpacking and Installation
< 43 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
2.4.5 Removing Protection Hardware Securing Pickup Unit (X 1
trays)
After removal of the protective film from the exposure unit conveyor rollers, the protection
hardware securing the supply tray 1 pick units should be removed.
2
Press lever C (green) and open the left cover.
3
Disengage the supply tray 1 lock by inserting a
driver with a shaft length of 90mm or more
shown below into the hole at the right side of the
main body and pressing down the latch.
- This will disengage the supply tray 1 lock.
4
Pull out supply tray 1 to its fullest extent.
