Ch.3 Setup
< 105 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
1
Switch to the service maintenance mode.
p.86 Switching to
the Service
Maintenance
Mode
2
Touch the [SERVICE 1] button.
- The installation setup buttons will be displayed.
3
Touch the [SYSTEM SETUP] button.
- The system setup screen (1/2) will be displayed.
4
Set the log-in password, language used and log
acquisition mode.
- Use the ON/OFF buttons to enable or disable log-in
password settings.
- Use the [<][>] buttons to make selections for
language used and log acquisition mode settings.
5
Touch the [>] button at the bottom left of the
screen.
- The system setup screen (2/2) will be displayed.
6
If necessary, check the memory type, operating
time, total output sheet count, software version
and MAC address.
2
3
4
5
6
