Ch.1 Pre-installation Information
< 14 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
Connection to
17 or more external
devices?
Connection to
20 or fewer external
devices?
2 or more
devices connected to
the expanded
port?
5 or fewer
devices connected to
the expanded
port?
3 or fewer
devices connected to
the expanded
port?
Connection in the
expanded port specification
should be made to 1 DRYPRO 793.
External devices should be
connected to 2 or more
DRYPRO 793 units.
Connections should be made
to 1 DRYPRO 793 unit is
the basic specification.
YES
NO
NO
NO
NO
NO
YES
YES
YES
YES
Adjustments should be made so
that three of the external devices are
not allocated to the expanded port.
Flow Chart Showing Determination of Basic
Specification/Expanded Port Specification
A flow chart showing how to determine whether the connections should be made in the basic or
expanded port specification is set out below.
In cases where there is sufficient space and more than one DRYPRO 793 installed,
the basic specification should be selected.
Conditions for devices allocated to the expanded port.
- KDIS devices (RS Series, IS Series, Liteview) or REGIUS Series (backup settings
only)
- Maximum daily print count of 20 sheets per device.
- LUT setting fixed to "linear".
- Print conditions common to the additional 5ch.
