Ch.3 Setup
< 125 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
(3) Registration of newly created LUT data.
The procedure for registration of newly created LUT data is described
below.
1
Select the LUT number to be registered by
touching the scroll buttons at the left and right of
the edit LUT number.
2
To change the LUT value, touch the desired
LUT value button (0
~
16).
- Touching a LUT value button will produce display
of a set value input screen.
3
Touch the [SAVE] button.
- Settings will be saved and display returned to the
service maintenance screen.
Touching the [Return] button during the
process of making setting changes will
produce display of a message requesting
confirmation of whether or not to save
settings.
[YES]
: Settings will be saved and display
returned to the service
maintenance screen.
[NO]
: The service maintenance screen
will be displayed without saving
settings.
1
2
3