Kongsberg Simrad SN90, Installation Manual

Page: 262 / 298

260
381298/C
Caution
Units containing lithium or alkaline batteries must be handled separately and with care.
Such units are marked accordingly. Do not attempt to recharge such batteries, open
them, or dispose of them by incineration.
Refer to the applicable product data sheets or battery handling procedures for further
details.
Temperature protection
Any units that requires protection against extreme temperatures are identified as such
in the applicable documentation. The box used to transport and store such units are
clearly marked, for example:
Must not be transported or stored in temperatures below -5 °Celsius.
Other temperature limits may be used if applicable.
If a unit needs temperature protection, the box to be used for storage and transportation
must be lined on all walls, base and lid, using minimum 5 cm thick polyurethane or
polystyrene foam.
Most system units can normally be stored in temperatures between -30° C and +70° C.
Refer to the relevant technical specifications for details.
Note
Unless otherwise specified, transducers and hydrophones must not be stored in
temperatures below −10°C and above +50°C.
Unpacking instructions
Prior to installation or use, electronic, electromechanical and mechanical units must
be unpacked from their transport boxes. It is important that this unpacking is done
according to the relevant instructions, and without inflicting damage to the equipment.
Topics
Unpacking standard parts and units, page 261
Unpacking mechanical units, page 262
Unpacking electronic and electromechanical units, page 263
Unpacking transducers, page 264
Simrad SN90