Kongsberg Simrad SN90, Installation Manual

Page: 12 / 298

10
381298/C
Installation drawings
The customer, or the shipyard contracted to do the installation, must provide relevant
detailed vessel specific mechanical drawings.
Note
If required, all documents provided by the shipyard for the physical installation of the
SN90 must be approved by the vessel’s national registry and corresponding maritime
authority and/or classification society. Such approval must be obtained before the
installation can begin. The shipowner and shipyard doing the installation are responsible
for obtaining and paying for such approval.
Kongsberg Maritime AS may, on special order, provide assistance to these drawings.
Applicable generic outline dimension and/or productions drawings are provided in the
Drawing file chapter. Drawings may also be downloaded in PDF and/or DWG formats
from our website.
• http://www.simrad.com/sn90
On-line information
All end user manuals provided for operation and installation of your Simrad SN90 can
be downloaded from our website.
• http://www.simrad.com/sn90
Our website will also give you information about other Simrad products.
License information
The SN90 is not a licensed product.
Registered trademarks
Observe the registered trademarks that apply.
Simrad ® , SIMRAD ® and the Simrad ® logo are either registered trademarks, or
trademarks of Kongsberg Maritime AS in Norway and other countries.
Windows ® , Windows XP ® , and Windows ® 7 are either registered trademarks, or
trademarks of Microsoft Corporation in the United States and/or other countries.
Simrad SN90