Kongsberg Simrad SN90, Installation Manual

Page: 271 / 298

381298/C
269
Caution
Units containing lithium or alkaline batteries must be handled separately and
with care. Such units are marked accordingly. Do not attempt to recharge such
batteries, open them, or dispose of them by incineration.
Refer to the applicable product data sheets or battery handling procedures for
further details.
9 Place a suitably sized bag of desiccant material (silica gel or similar) into the unit
to keep the electronic components as dry as possible.
10 Close the cabinet firmly before storage and/or shipment.
11 Secure and protect loose parts (shock absorbers, plug and sockets, protruding
objects etc).
12 If the electronic cabinet shall be sent to storage or shipped, spray it externally using
a corrosion inhibitor (for example a light oil) prior to packing.
Cleaning a mechanical or electromechanical unit
If an mechanical unit has been exposed to s salt atmosphere, it must be thoroughly
cleaned to prevent corrosion.
Prerequisites
In order to clean a mechanical or electromechanical unit, you will need relevant tools
and detergents.
Procedure
1 Wipe off the external surfaces of the mechanical unit using a damp lint free cloth
and a mild detergent.
Note
Do not use excessive amounts of water. The unit may include parts that are not
water tight.
2 On completion, dry the unit thoroughly.
3 Inspect all surfaces for signs of corrosion, flaking, bubbling paint, stains etc.
4 Clean damaged or suspect areas, prepare and preserve these areas using the correct
preservation mediums.
5 Wipe clean all exposed cables, and check for damage.
If a cable shows signs of wear or ageing, contact Kongsberg Maritime for advice.
6 Secure and protect loose parts (shock absorbers, plug and sockets, protruding
objects etc).
Equipment handling