Kongsberg Simrad SN90, Installation Manual

Page: 162 / 298

160
381298/C
AC mains power cable using IEC C13 inline socket
This is a commercial power cable normally used for 230 Vac mains power. The inline
socket and plug comply to the IEC60320 standard.
A IEC13 line socket - may be fitted with a locking device
B CEE 7/7 male power plug
C Live (normally identified with Blue insulation)
D Neutral (normally identified with Brown insulation)
E Ground (normally identified with Yellow or Yellow/Green insulation)
A standard commercial AC mains cable is used.
The power cable is normally terminated with an female IEC C13 inline socket. The AC
mains end is terminated in an AC connector suitable for the local standard and/or the
output sockets on a Uninterruptible Power Supply (UPS) unit. If this is not the case, you
must replace the AC connector.
The typical cable length is between 1,5 and 2 meters. If this is too short you must use an
extension cable (not recommended), mount a new power outlet within range, or make
your own power cable with sufficient length. If you use an Uninterruptible Power Supply
(UPS), you can also move the UPS unit to a different location within range.
Note
There are substantial differences between American and British nomenclature related to
power plugs and sockets. Observe local standards and regulations.
Simrad SN90