Komatsu PC200-8M0, Shop Manual

Page: 1127 / 1254

SEN06148-01
PC200, 200LC, 220, 220LC-8M0 50-700
11
700 Cab and its attachments
Removal and installation of operator cab glass (stuck
a
When positioning front window glass
(4), set its horizontal position to the
frame width.
And set its vertical position to make
the height difference (p) between the
frame top and the front window glass
3 mm.
6. Apply adhesive.
a
Use either of two types of adhesives
according to the season.
2 Adhesive (Apr. to Oct.):
Sunstar penguine seal 580 super “S“
or equivalent
2 Adhesive (Oct. to Apr.):
Sunstar penguine seal 580 super “W“
or equivalent
a
The using limit of the adhesive is 4 months
after the date of manufacture. Do not use
the adhesive after this limit.
a
Keep the adhesive in a dark place where
the temperature is below 25°C.
a
Never heat the adhesive higher than
30°C.
a
When reusing the adhesive, remove the
all hardened part form the nozzle tip.
1) Break aluminum seal (13) of the outlet of
adhesive cartridge (12) and install the
nozzle.
2) Cut the tip of the adhesive nozzle (14) so
that dimensions (q) and (r) will be as fol-
lows.
q Dimension (q): 10 mm
q Dimension (r): 15 mm
3) Set adhesive cartridge (12) to caulking
gun [7].
a
An electric caulking gun is more effi-
cient.