Keysight DSOX1202A, User Manual

Page: 6 / 330

6 Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
In This Guide
This guide shows how to use the InfiniiVision 1200 X-Series and EDUX1052A/G
oscilloscopes.
When unpacking and using the
oscilloscope for the first time, see:
• Chapter 1 , “Getting Started,” starting on page 21
When displaying waveforms and
acquired data, see:
• Chapter 2 , “Horizontal Controls,” starting on page 37
• Chapter 3 , “Vertical Controls,” starting on page 47
• Chapter 4 , “Analog Bus Display,” starting on page 55
• Chapter 5 , “FFT Spectral Analysis,” starting on page 57
• Chapter 6 , “Math Waveforms,” starting on page 65
• Chapter 7 , “Reference Waveforms,” starting on page
77
• Chapter 8 , “Serial Bus Decode/Trigger,” starting on
page 81
• Chapter 9 , “Display Settings,” starting on page 83
• Chapter 10 , “Labels,” starting on page 91
When setting up triggers or changing
how data is acquired, see:
• Chapter 11 , “Triggers,” starting on page 97
• Chapter 12 , “Trigger Mode/Coupling,” starting on
page 121
• Chapter 13 , “Acquisition Control,” starting on page
129
Making measurements and analyzing
data:
• Chapter 14 , “Cursors,” starting on page 145
• Chapter 15 , “Measurements,” starting on page 155
• Chapter 16 , “Mask Testing,” starting on page 179
• Chapter 17 , “Digital Voltmeter,” starting on page 193
• Chapter 18 , “Frequency Response Analysis,” starting
on page 197
When using the built-in waveform
generator, see:
• Chapter 19 , “Waveform Generator,” starting on page
203
When saving, recalling, or printing,
see:
• Chapter 20 , “Save/Recall (Setups, Screens, Data),”
starting on page 215
• Chapter 21 , “Print (Screens),” starting on page 227