155
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes
User's Guide
15 Measurements
To make automatic measurements / 156
Measurements Summary / 157
Voltage Measurements / 160
Time Measurements / 167
Count Measurements / 174
Measurement Thresholds / 175
Measurement Window with Zoom Display / 177
The
[Meas]
key lets you make automatic measurements on waveforms. Some
measurements can only be made on analog input channels.
The results of the last four selected measurements are displayed in the
Measurements information area at the bottom of the screen.
Cursors are turned on to show the portion of the waveform being measured for the
most recently added measurement.
NOTE
Post Acquisition Processing
In addition to changing display parameters after the acquisition, you can perform all of the
measurements and math functions after the acquisition. Measurements and math functions
will be recalculated as you pan and zoom and turn channels on and off. As you zoom in and out
on a signal using the horizontal scale knob and vertical volts/division knob, you affect the
resolution of the display. Because measurements and math functions are performed on
displayed data, you affect the resolution of functions and measurements.
