24
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
1
Getting Started
Recall the Default Oscilloscope Setup
To recall the default oscilloscope setup:
1
Press
[Default Setup]
.
The default setup restores the oscilloscope's default settings. This places the
oscilloscope in a known operating condition.
In the Save/Recall menu, there are also options for restoring the complete factory
settings or performing a secure erase (see
Screens, Data),” starting on page 215).
Use Autoscale
Use
[Auto Scale]
to automatically configure the oscilloscope to best display the
input signals.
1
Press
[Auto Scale]
.
You should see a waveform on the oscilloscope's display similar to this:
WARNING
A voltage source should never be connected to the ground terminal of this instrument.
If, for any reason, the Protective Conductor Terminal is disconnected or not functioning
properly and a voltage source is connected to the equipment's ground terminals, the
entire chassis will be at the voltage potential of the voltage source, and the operator or
bystanders could receive an electric shock.
