Triggers
11
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
107
5
Press the
Rising Edge or Falling Edge
softkey to toggle between edge types.
6
Press the
Level Select
softkey to select
High
; then, turn the Trigger Level knob to
adjust the high level.
7
Press the
Level Select
softkey to select
Low
; then, turn the Trigger Level knob to
adjust the low level.
You can also push the Trigger Level knob to toggle between
High
and
Low
selection.
8
Press the
Qualifier
softkey to toggle between "greater than" or "less than".
9
Press the
Time
softkey, and turn the Entry knob to select the time.
Setup and Hold Trigger
On DSOX1200-Series oscilloscopes, the Setup and Hold trigger looks for setup
and hold violations.
One oscilloscope channel probes the clock signal and another channel probes the
data signal.
To trigger on setup & hold violations:
1
Press the
[Trigger]
key.
2
In the Trigger menu, press the
Trigger Type
softkey.
3
Press the
Trigger Type
softkey; then, turn the Entry knob to select
Setup and Hold
.
4
Press the
Clock
softkey; then, turn the Entry knob to select the input channel
with the clock signal.
5
Set the appropriate trigger tevel for the clock signal using the Trigger Level
knob.
Data
Clock
(rising
edge)
Setup time
Hold time
