Acquisition Control
13
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
139
The higher the number of averages, the slower the displayed waveform responds
to waveform changes. You must compromise between how quickly the waveform
responds to changes and how much you want to reduce the displayed noise on
the signal.
To use the Averaging mode:
1
Press the
[Acquire]
key, then press the
Acq Mode
softkey until the Averaging
mode is selected.
2
Press the
#Avgs
softkey and turn the Entry knob to set the number of averages
that best eliminates the noise from the displayed waveform. The number of
acquisitions being averaged is displayed in the
# Avgs
softkey.
Figure 26
Random noise on the displayed waveform
