Keysight DSOX1202A, User Manual

Page: 247 / 330

Utility Settings
22
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide 247
• Off — disables the [Quick Action] key.
• Quick Measure All — displays a popup containing a snapshot of all the single
waveform measurements. The Source softkey lets you select the waveform
source (which also becomes the source selection in the Measurement
menu). See Chapter 15 , “Measurements,” starting on page 155.
• Quick Mask Statistics Reset — resets mask testing statistics. For more
information, see "Mask Statistics" on page 184.
• Quick Print — prints the current screen image. Press Settings to set up the
printing options. See Chapter 21 , “Print (Screens),” starting on page 227.
• Quick Save — saves the current image, waveform data, or setup. Press Settings
to set up the save options. See Chapter 20 , “Save/Recall (Setups, Screens,
Data),” starting on page 215.
• Quick Recall — recalls a setup, mask, or reference waveform. Press Settings to
set up the recall options. See Chapter 20 , “Save/Recall (Setups, Screens,
Data),” starting on page 215.
• Quick Freeze Display — freezes the display without stopping running
acquisitions or un-freezes the display if currently frozen. For more
information, see "To freeze the display" on page 89.
• Quick Trigger Mode — toggles the trigger mode between Auto and Normal, see
"To select the Auto or Normal trigger mode" on page 122.
• Quick Clear Display — clears the display, see "To clear the display" on
page 86.
Once the [Quick Action] key is configured, you simply press it to perform the
selected action.