52
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
3
Vertical Controls
2
In the Channel menu, press the
Probe
softkey to display the Channel Probe
menu.
The Channel Probe menu lets you select additional probe
parameters such as attenuation factor and units of
measurement for the connected probe.
The
Probe Check
softkey guides you through the process of
compensating passive probes (such as the N2140A, N2142A,
N2862A/B, N2863A/B, N2889A, N2890A, 10073C, 10074C,
or 1165A probes).
See Also
•
"To specify the channel units"
•
"To specify the probe attenuation"
•
To specify the channel units
1
Press the probe's associated channel key.
2
In the Channel menu, press
Probe
.
3
In the Channel Probe menu, press
Units
; then, select:
•
Volts
— for a voltage probe.
•
Amps
— for a current probe.
Channel sensitivity, trigger level, measurement results, and math functions will
reflect the measurement units you have selected.
To specify the probe attenuation
The probe attenuation factor must be set properly for accurate measurement
results.