146
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
14
Cursors
The Y1 cursor is the short-dashed horizontal line and the Y2 cursor is the
long-dashed horizontal line.
The Y cursors adjust vertically and typically indicate values relative to the
waveform's ground point, except math FFT where the values are relative to 0 dB.
In XY horizontal mode, the Y cursors display channel 2 values (Volts or Amps).
When active, the Y1 and Y2 cursor values for the selected waveform source are
displayed in the softkey menu area.
The difference between Y1 and Y2 (
Δ
Y) is displayed in the Cursors box in the
right-side information area.
To make cursor measurements
1
Connect a signal to the oscilloscope and obtain a stable display.
2
Press the
[Cursors]
key.
The Cursors box in the right-side information area appears, indicating that
cursors are "on". (Press the
[Cursors]
key again when you want to turn cursors
off.)
3
In the Cursors menu, press
Mode
; then, select the desired mode:
