230
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
21
Print (Screens)
To specify the print options
In the Print Config menu, press the
Options
softkey to change the following
options:
•
Setup Information
— Select this to print oscilloscope setup information on your
printout, including vertical, horizontal, trigger, acquisition, math, and display
settings.
•
Invert Graticule Colors
— Select this to reduce the amount of black ink it takes to
print oscilloscope images by changing the black background to white.
Invert
Graticule Colors
is the default mode.
•
Form Feed
— Select this to send a form feed command to the printer after the
waveform is printed and before the setup information is printed. Switch
Form
Feed
off if you want setup information printed on the same sheet of paper with
the waveform. This option only has an effect when the
Setup Information
option is
selected. Also, if the amount of setup information will not fit on the same page
with the waveform, it will be printed on a new page regardless of the
Form Feed
setting.
•
Landscape
— Select this to print horizontally on the page instead of vertically
(portrait mode).
To specify the palette option
In the Print Config menu, press the
Palette
softkey to change the following options.
•
Color
— Select this to print the screen in color.
The oscilloscope's print driver cannot print color images to color laser printers,
so the
Color
option is not available when connected to laser printers.
•
Grayscale
— Select this to print the screen in shades of gray rather than in color.
