203
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes
User's Guide
19 Waveform Generator
To select generated waveform types and settings / 203
To specify the expected output load / 206
To use waveform generator logic presets / 207
To add noise to the waveform generator output / 207
To add modulation to the waveform generator output / 208
To restore waveform generator defaults / 213
On G-suffix oscilloscope models, a waveform generator is built into the
oscilloscope. The waveform generator gives you an easy way to provide input
signals when testing circuitry with the oscilloscope.
Waveform generator settings can be saved and recalled with oscilloscope setups.
, “Save/Recall (Setups, Screens, Data),” starting on page 215.
To select generated waveform types and settings
1
To access the Wave Gen menu and enable or disable the waveform generator
output on the front panel Gen Out BNC, press the
[Wave Gen]
key.
When waveform generator output is enabled, the
[Wave Gen]
key is illuminated.
When waveform generator output is disabled, the
[Wave Gen]
key is off.
The waveform generator output is always disabled when the instrument is first
turned on.
The waveform generator output is automatically disabled if excessive voltage is
applied to the Gen Out BNC.
2
In the Wave Gen menu, press the
Waveform
softkey and turn the Entry knob to
select the waveform type.