Intel S2600CW Technical Product Specification Download Page 56

Page: 56 / 210

Intel® Server Board S2600CW Functional Architecture

Intel® Server Board S2600CW Family TPS

Revision 2.4

select recovery options when problems occur. The user interface can be accessed by

hitting the <CTRL-I > keys during system POST.



Providing boot support when using a RAID volume as a boot disk. It does this by

providing Int13 services when a RAID volume needs to be accessed by MS-DOS

applications (such as NTLDR) and by exporting the RAID volumes to the System BIOS

for selection in the boot order.



Providing the user with a status of the RAID volumes at each boot up.

3.4.8.2

Intel® Embedded Server RAID Technology 2 (ESRT2)

Features of ESRT2 include the following:



Based on LSI* MegaRAID Software Stack



Software RAID with system providing memory and CPU utilization



Native support for RAID Levels – 0, 1, 10



Optional support for RAID Level 5

Enabled with the addition of an optionally installed SATA RAID 5 Upgrade Key



Maximum drive support = 8



Open Source Compliance = Binary Driver (includes Partial Source files) or Open Source

using MDRAID layer in Linux*



OS Support = Windows 7*, Windows 2008*, Windows 2003*, RHEL*, SLES, other Linux*

variants using partial source builds



Utilities = Windows* GUI and CLI, Linux GUI and CLI, DOS CLI, and EFI CLI

Summary of Contents for S2600CW



















































































































































































































Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands

Intel S2600CW, Technical Product Specification

Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands