Intel S2600CW Technical Product Specification Download Page 63

Page: 63 / 210

Intel® Server Board S2600CW Family TPS

Intel® Server Board S2600CW Functional Architecture

Revision 2.4

3.4.12.2

Setting Video Configuration Options using the BIOS Setup Utility

Advanced

PCI Configuration

Memory Mapped I/O above 4 GB

Enabled

/ Disabled

Memory Mapped I/O Size

Auto/1G/2G/4G/8G/16G/32G/64G/128G/

256G

/512G/

1024G

Add-in Video Adapter

Enabled

/ Disabled

Onboard Video

Enabled

/ Disabled

Legacy VGA Socket

CPU Socket 1

/ CPU Socket 2

►

PCIe Slot Bifurcation Setting

►

NIC Configuration

►

UEFI Network Stack

►

UEFI Option ROM Control

►

PCIe Port Oprom Control

Figure 16. BIOS Setup Utility – Video Configuration Options

Add-in Video Adapter

Option Values:

Enabled

Disabled

Help Text:

If enabled, the Add-in video adapter works as primary video device during POST

if installed. If disabled, the on-board video controller becomes the primary video

device.

Comments:

This option must be enabled to use an add-in card as a primary POST

Legacy Video device.

If there is no add-in video card in any PCIe slot connected to CPU Socket 1 with the

Legacy VGA Socket option set to

CPU Socket 1

, this option is set to

Disabled

and

grayed out and unavailable.

If there is no add-in video card in any PCIe slot connected to CPU Socket 2 with the

Legacy VGA Socket option set to

CPU Socket 2

, this option is set to

Disabled

and

grayed out and unavailable.

If the Legacy VGA Socket option is set to CPU Socket 1 with both Add-in Video Adapter

and Onboard Video Enabled, the onboard video device works as primary video device

while add-in video adapter as secondary.

Summary of Contents for S2600CW



















































































































































































































Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands

Intel S2600CW, Technical Product Specification

Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands