Intel S2600CW Technical Product Specification Download Page 107

Page: 107 / 210

Intel® Server Board S2600CW Family TPS

Intel® Server Board S2600CW Platform Management

Revision 2.4



Media redirection supports redirection for both a virtual CD device and a virtual

Floppy/USB device concurrently. The CD device may be either a local CD drive or else

an ISO image file; the Floppy/USB device may be a local Floppy drive, a local USB

device, or a disk image file.



The media redirection feature supports multiple encryption algorithms, including RC4

and AES. The actual algorithm that is used is negotiated with the client based on the

client’s capabilities.



A remote media session is maintained even when the server is powered-off (in standby

mode). No restart of the remote media session is required during a server reset or

power on/off. A BMC reset (for example, due to an BMC reset after BMC FW update) will

require the session to be re-established.



The mounted device is visible to (and useable by) managed system’s OS and BIOS in

both pre-boot and post-boot states.



The mounted device shows up in the BIOS boot order and it is possible to change the

BIOS boot order to boot from this remote device.



It is possible to install an operating system on a bare metal server (no OS present)

using the remotely mounted device. This may also require the use of KVM-r to

configure the OS during install.

USB storage devices will appear as floppy disks over media redirection. This allows for the

installation of device drivers during OS installation.

If either a virtual IDE or virtual floppy device is remotely attached during system boot, both the

virtual IDE and virtual floppy are presented as bootable devices. It is not possible to present

only a single-mounted device type to the system BIOS.

5.5.8.1

Availability

The default inactivity timeout is 30 minutes and is not user-configurable. Media redirection

sessions persist across system reset but not across an AC power loss or BMC reset.

5.5.8.2

Network Port Usage

The KVM and media redirection features use the following ports:



5120 – CD Redirection



5123 – FD Redirection



5124 – CD Redirection (Secure)



5127 – FD Redirection (Secure)



7578 – Video Redirection



7582 – Video Redirection (Secure)

For additional information, reference the

Intel

Remote Management Module 4 and Integrated

BMC Web Console Users Guide

Summary of Contents for S2600CW



















































































































































































































Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands

Intel S2600CW, Technical Product Specification

Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands