Intel S2600CW Technical Product Specification Download Page 57

Page: 57 / 210

Intel® Server Board S2600CW Family TPS

Intel® Server Board S2600CW Functional Architecture

Revision 2.4

The following diagram identifies the location of the key to enable ESRT2 RAID level 5.

Using the <F2> BIOS Setup Utility, accessed during system POST, system setup options are

available to enable/disable the Software RAID feature. By default, the embedded SATA

Software RAID feature is disabled.

3.4.9

Serial Attached SCSI (SAS) Support

The Intel® Server Board S2600CW2SR/S2600CWTSR supports a Gen3 12G SAS IO Controller

with LSISAS3008 (S2600CW2R/S2600CWTR does not support this). The 8-port SAS (12G) or

SATA (6G) will connect to a 1x2 Right Angle (RA) mini-SAS HD connector and be used for Hot

Swap Backplane (HSBP) connectivity.

The following list summarizes the features of the LSISAS3008 controller:



Providing an eight-lane 8Gbps PCIe 3.0 host interface



Providing an eight-port 12Gbps SAS and 6Gbps SATA interface



Providing a full-featured hardware-based RAID solution that supports RAID levels 0, 1,

1E, and 10



16Mbytes Flash ROM memory



256kbit MRAM memory for write journaling support



Up to two 36-pin RA mini-SAS HD connectors

Summary of Contents for S2600CW



















































































































































































































Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands

Intel S2600CW, Technical Product Specification

Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands