Intel S2600CW Technical Product Specification Download Page 124

Page: 124 / 210

Intel® Server Board S2600CW Connector/Header Locations and Pin-outs

Intel® Server Board S2600CW Family TPS

110

Revision 2.4

•

Reuse Pin A7 as SAS_MODULE_ENABLE. This change applies to standard PCIe slot as

well

•

Reuse Pin B17 as MUX_RST_N.

•

Reuse Pin B48/A50/B31 as LINK_WIDTH_ID.

•

Reuse A32/A33 as additional PCIe Clocks to the 2nd slot on the risers.

NOTES:



The 3rd REFCLK is not used.



LINK_WIDTH_ID2 is not used on slot 6, which is pulled to GND via a 4.75Kohm resistor.



For pin B12, it is connected to system throttling signal to throttle input for Xeon Phi.

Summary of Contents for S2600CW



















































































































































































































Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands

Intel S2600CW, Technical Product Specification

Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands