Intel S2600CW Technical Product Specification Download Page 77

Page: 77 / 210

Intel® Server Board S2600CW Family TPS

Intel® Server Board S2600CW Platform Management

Revision 2.4



Energy Star Server Support.



Smart Ride Through (SmaRT) / Closed Loop System Throttling (CLST).



Power Supply Cold Redundancy.



Power Supply FW Update.



Power Supply Compatibility Check.



BMC FW reliability enhancements:

Redundant BMC boot blocks to avoid possibility of a corrupted boot block

resulting in a scenario that prevents a user from updating the BMC

BMC System Management Health Monitoring

5.2

Platform Management Features and Functions

5.2.1

Power Subsystem

The server board supports several power control sources which can initiate power-up or

power-down activity.

Source

External Signal Name or

Internal Subsystem

Capabilities

Power button

Front panel power button

Turns power on or off

BMC watchdog timer

Internal BMC timer

Turns power off, or power cycle

BMC chassis control

Commands

Routed through command processor Turns power on or off, or power cycle

Power state retention

Implemented by means of BMC

internal logic

Turns power on when AC power returns

Chipset

Sleep S4/S5 signal (same as

POWER_ON

)

Turns power on or off

CPU Thermal

Processor Thermtrip

Turns power off

PCH Thermal

PCH Thermtrip

Turns power off

WOL (Wake On LAN)

LAN

Turns power on

5.2.2

Advanced Configuration and Power Interface (ACPI)

The server board has support for the following ACPI states.

Table 9. ACPI Power States

State

Supported

Description

Yes

Working.



The front panel power LED is on (not controlled by the BMC).



The fans spin at the normal speed, as determined by sensor inputs.



Front panel buttons work normally.

Not supported.

Summary of Contents for S2600CW



















































































































































































































Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands

Intel S2600CW, Technical Product Specification

Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands