Intel S2600CW Technical Product Specification Download Page 73

Page: 73 / 210

Intel® Server Board S2600CW Family TPS

System Security

Revision 2.4

confidentiality and integrity of sensitive information without compromising the usability of the

platform.

Intel® Trusted Execution Technology requires a computer system with Intel® Virtualization

Technology enabled (both VT-x and VT-d), an Intel® Trusted Execution Technology-enabled

processor, chipset, and BIOS, Authenticated Code Modules, and an Intel® Trusted Execution

Technology compatible measured launched environment (MLE). The MLE could consist of a

virtual machine monitor, an OS, or an application. In addition, Intel® Trusted Execution

Technology requires the system to include a TPM v1.2, as defined by the

Trusted Computing

Group TPM PC Client Specifications, Revision 1.2

When available, Intel® Trusted Execution Technology can be enabled or disabled in the

processor by a BIOS Setup option.

For general information about Intel® TXT, visit the Intel® Trusted Execution Technology

website,

http://www.intel.com/technology/security/

Summary of Contents for S2600CW



















































































































































































































Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands

Intel S2600CW, Technical Product Specification

Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands