Intel S2600CW Technical Product Specification Download Page 129

Page: 129 / 210

Intel® Server Board S2600CW Family TPS

Intel® Server Board S2600CW Jumper Blocks

Revision 2.4

115

8.4

BIOS Recovery Jumper

When the BIOS Recovery jumper block is moved from its default pin position (pins 1-2), the

system will boot to the uEFI shell, where a standard BIOS update can be performed. See the

BIOS update instructions that are included with System Update Packages (SUP) downloaded

from Intel’s download center web site. This jumper is used when the system BIOS has become

corrupted and is non-functional, requiring a new BIOS image to be loaded on to the server

board. The following procedure should be followed.

Turn off the system.

For safety, remove the AC power cords.

Remove the system top cover.

Move the “

BIOS Recovery

” jumper from the default operating position (covering pins 1 and

2) to the BIOS Recovery position (covering pins 2 and 3).

Reinstall the system top cover and reattach the AC power cords.

Power on the system.

The system will automatically boot to the EFI shell. Update the BIOS using the standard

BIOS update instructions provided with the system update package.

After the BIOS update has successfully completed, power off the system. For safety,

remove the AC power cords from the system.

Remove the system top cover.

10.

Move the “

BIOS Recovery

” jumper back to the default operating position (covering pins 1

and 2).

11.

Reinstall the system top cover and reattach the AC power cords.

12.

Power on the system and access the <F2> BIOS Setup utility.

13.

Configure desired BIOS settings.

14.

Hit the <F10> key to save and exit the utility.

Summary of Contents for S2600CW



















































































































































































































Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands

Intel S2600CW, Technical Product Specification

Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands