manualshive.com logo in svg

Intel S2600CW, Technical Product Specification

The Intel S2600CW Technical Product Specification manual is available for free download on our website. This comprehensive guide provides all the essential technical information about the product, ensuring a seamless user experience. Enhance your knowledge and optimize your usage by accessing the manual at manualshive.com.

Share
Download
background image

Intel® Server Board S2600CW Platform Management 

Intel® Server Board S2600CW Family TPS 

92 

 

Revision 2.4 

5.5.4

 

Security 

The KVM redirection feature supports multiple encryption algorithms, including RC4 and AES. 

The actual algorithm that is used is negotiated with the client based on the client’s capabilities. 

5.5.5

 

Availability 

The remote KVM session is available even when the server is powered-off (in stand-by mode). 

No re-start of the remote KVM session shall be required during a server reset or power on/off. 

A BMC reset (for example, due to a BMC Watchdog initiated reset or BMC reset after BMC FW 

update) will require the session to be re-established. 

KVM sessions persist across system reset, but not across an AC power loss. 

5.5.6

 

Usage 

As the server is powered up, the remote KVM session displays the complete BIOS boot 

process. The user is able interact with BIOS setup, change and save settings as well as enter 

and interact with option ROM configuration screens. 

At least two concurrent remote KVM sessions are supported. It is possible for at least two 

different users to connect to the same server and start remote KVM sessions. 

5.5.7

 

Force-enter BIOS Setup 

KVM redirection can present an option to force-enter BIOS Setup. This enables the system to 

enter F2 setup while booting which is often missed by the time the remote console redirects 

the video. 

5.5.8

 

Media Redirection 

The embedded web server provides a Java applet to enable remote media redirection. This 

may be used in conjunction with the remote KVM feature, or as a standalone applet. 

The media redirection feature is intended to allow system administrators or users to mount a 

remote IDE or USB CD-ROM, floppy drive, or a USB flash disk as a remote device to the server. 

Once mounted, the remote device appears just like a local device to the server, allowing 

system administrators or users to install software (including operating systems), copy files, 

update BIOS, and so on, or boot the server from this device. 

The following capabilities are supported: 

 

The operation of remotely mounted devices is independent of the local devices on the 

server. Both remote and local devices are useable in parallel. 

 

Either IDE (CD-ROM, floppy) or USB devices can be mounted as a remote device to the 

server. 

 

It is possible to boot all supported operating systems from the remotely mounted 

device and to boot from disk IMAGE (*.IMG) and CD-ROM or DVD-ROM ISO files. See 

the Tested/supported Operating System List for more information. 

Summary of Contents for S2600CW



















































































































































































































Reviews:

No comments

Related manuals for S2600CW

IBM NetVista N2800e Reference Manual preview
NetVista N2800e
Brand: IBM Pages: 82
Sun Fire X4600 Installation Manual preview
X4600
Brand: Sun Fire Pages: 66
Kontron CG2100 Installation And Maintenance Manual preview
CG2100
Brand: Kontron Pages: 110
Olive Olive 2 User Manual preview
Olive 2
Brand: Olive Pages: 44
Acard ARS-2212 User Manual preview
ARS-2212
Brand: Acard Pages: 43
Compaq AlphaServer ES45 1B Owner'S Manual preview
AlphaServer ES45 1B
Brand: Compaq Pages: 322
MAXDATA PLATINUM 1500 IR M5 User Manual preview
PLATINUM 1500 IR M5
Brand: MAXDATA Pages: 44
Inspur NF5486M5 Installation Manual preview
NF5486M5
Brand: Inspur Pages: 2
D-Link DPR-2000 Quick Installation Manual preview
DPR-2000
Brand: D-Link Pages: 40
Kenwood HAM RADIO DELUXE User Manual preview
HAM RADIO DELUXE
Brand: Kenwood Pages: 16
Siemens APOGEE Ethernet Microserver 2100 Installation Instructions preview
APOGEE Ethernet Microserver 2100
Brand: Siemens Pages: 2
Siemens OCI670 Series Installation Instructions Manual preview
OCI670 Series
Brand: Siemens Pages: 38
Siemens 3964R User Manual preview
3964R
Brand: Siemens Pages: 40
Siemens RUGGEDCOM RS401 Installation Manual preview
RUGGEDCOM RS401
Brand: Siemens Pages: 50
Siemens PRIMERGY 560 Operating Manual preview
PRIMERGY 560
Brand: Siemens Pages: 101
Siemens OZW672 Series Commissioning Instructions preview
OZW672 Series
Brand: Siemens Pages: 116
Siemens OZW672.01 Commissioning Instructions preview
OZW672.01
Brand: Siemens Pages: 143
Siemens HiPath Xpressions User Manual preview
HiPath Xpressions
Brand: Siemens Pages: 278

Brands by name

Popular brands

Load more brands