Intel S2600CW Technical Product Specification Download Page 102

Page: 102 / 210

Intel® Server Board S2600CW Platform Management

Intel® Server Board S2600CW Family TPS

Revision 2.4



Warn user the reconfiguration of IP address will cause disconnect



Capability to block logins for a period of time after several consecutive failed login

attempts. The lock-out period and the number of failed logins that initiates the

lock-out period are configurable by the user.



Server Power Control – Ability to force into Setup on a reset



System POST results – The web server provides the system’s Power-On Self Test

(POST) sequence for the previous two boot cycles, including timestamps. The

timestamps may be viewed in relative to the start of POST or the previous POST code.



Customizable ports – The web server provides the ability to customize the port

numbers used for SMASH, http, https, KVM, secure KVM, remote media, and secure

remote media.

For additional information, reference the

Intel® Remote Management Module 4 and Integrated

BMC Web Console Users Guide

5.5

Advanced Management Feature Support (RMM4 Lite)

The integrated baseboard management controller has support for advanced management

features which are enabled when an optional Intel

Remote Management Module 4 Lite (RMM4

Lite) is installed. The Intel

RMM4 add-on offers convenient, remote KVM access and control

through LAN and internet. It captures, digitizes, and compresses video and transmits it with

keyboard and mouse signals to and from a remote computer. Remote access and control

software runs in the integrated baseboard management controller, utilizing expanded

capabilities enabled by the Intel RMM4 hardware.

Intel Product

Code

Description

Kit Contents

Benefits

AXXRMM4LITE Intel

Remote Management Module

4 Lite

RMM4 Lite Activation

Key

Enables KVM & media redirection

When the BMC FW initializes, it attempts to access the Intel

RMM4 lite. If the attempt to

access the Intel

RMM4 lite is successful, the BMC activates the Advanced features.

The following table identifies both Basic and Advanced server management features.

Table 13. Basic and Advanced Server Management Features Overview

Feature

Basic

Advanced

IPMI 2.0 Feature Support

In-circuit BMC Firmware Update

FRB 2

Chassis Intrusion Detection

Fan Redundancy Monitoring

Hot-Swap Fan Support

Summary of Contents for S2600CW



















































































































































































































Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands

Intel S2600CW, Technical Product Specification

Search results

Summary of Contents for S2600CW

Reviews:

Related manuals for S2600CW

Brands by name

Popular brands