EloStar Master 3X0 / 4X0 / - smart
Operation
Manual V.1.03H
84
7.14.2
Changing the Master Code / CIT Master Code
With the master
– and, as it may be, the CIT master code of the lock you
can administrate users and, optionally, open the lock.
Caution
With the master code in ex works version, your
system is not protected.
Change ex works code as soon as possible. Never use
series of numbers corresponding with personal data.
1.
Unlock the system by opening lock 1 or by opening all locks.
See paragraph
‘System State’ on page 50.
2.
With menu key
<
or
>
select
Settings
and press key
Enter
.
Settings | Master code
is on display.
3.
Confirm
Master code
with
Enter
.
Code entry
and, as it may be,
Lock 1<
is on display.
4.
With menu key
<
or
>
select the lock, if necessary, and press
Enter
.
Code entry
,
Master
,
0123456789
, as the case may be, and
Code:
are on
display.
Also see paragraph ‘Entering PIN Code’ above.
With the CIT function set,
Code entry
and
User: Master
are on display.
With
<
or
>
you can select
CIT master
. In all other respects this instruction for
changing the master code also applies to the CIT master code.
5.
Enter the
‘old’ master - / CIT master code.
Master | Please wait
, and
New master code | Code:
are on display.
6.
Enter the new master - / CIT master code.
Confirm code
,
0123456789
, as it may be, and
Code:
are on display.
7.
Repeat entering the new master - / CIT master code.
New master code | Please wait
and
New master code | Saved
are on display.
You have changed the master
– or the CIT master code successfully.