EloStar Master 3X0 / 4X0 / - smart
System Description
Manual V.1.03H
18
Close locks after opening
For special systems containing boxes that should be locked properly immediately upon
being pushed closed.
Close lock 1 after opening
Mark this box in order to close lock 1 immediately after opening it.
Close lock 2 after opening
Mark this box in order to close lock 2 immediately after opening it.
Code card
Optional. Setting of kind of code card used for opening (RFID / chip card). With setting
“RFID”, RFID cards can be used as code cards, as it may be.
Range of values: ‘Chip card’, ‘RFID’. Default setting: ‘Chip card’.
RFID type
Optional with version EM11 and higher
. With „Code card“ (see above) set to „RFID“, the
RFID type can be specified here.
Range of values: ‘MIFARE CLASSIC’, ‘EM4X02’, ‘EM4X03’, ‘EM4X05’, ‘HITAG1’,
‘HITAG2’, ‘HITAG5’ and ‘LEGIC’, with QPad ‘DESFire‘ and, optionally, ‘MIFARE
CLASSIC’.
Prevent opening with 2 cards
Option that can be used for a 2 lock system with „Dual code“ or „Parallel code“ set and
„1 of 3“ set for users. Select this option in order to rule out that all users open with their
code card in this case.
Abortion of time program
Abortion of time program active
Mark this box in order to be able to activate the abortion of time programs via additional
pushbutton. Press the pushbutton in case you are shut in. Function is controlled via state
of door - / bolt
work switch (‘open’) and state of lock (‘locked’).
Serial number check via configuration card
Serial number check active
Mark this box in order to activate the check of the serial numbers of the devices by
comparing them to the numbers upon the configuration card. Input of serial numbers via
tab ‘Customer data’. With FlatControl only.
Code validity expiration
Code validity expiration (master)
Setting of the number of months after that master codes become invalid. Set value ‘00’
in order to switch the function off so that master codes remain valid without restrictions.
Code val. exp. (user group 2) [months]
Setting of the number of months after that user codes of group 2 become invalid. Set
value ‘00’ in order to switch the function off so that master codes remain valid without
restrictions.
Code val. exp. (master user group 2)
Setting of the number of months after that master code of the second group becomes
invalid. Set value ‘00’ in order to switch the function off so that master codes remain valid
without restrictions.